ASL INTERCOM BS 216 Manual de usuario descargar pdf (Pagina 9)

Cue Light System Accessories and Special Audio Products

TS 120 Cue Light Master Station

This 2U rack-mount unit includes 12 cue light

channels, plus two global push buttons for “All

Selected Channels Go” and “Clear.” Each cue light

channel has push buttons for ATTN (attention)

and GO, with a bi-color status LED that illuminates

red in ATTN mode and green in GO mode. The

presence of a connected TS 10 receiver is detected

automatically; if no receiver is present, the channel

is ignored by the TS 120. The auto-select power

supply may be connected to voltages from 100 –

240 V at 50 or 60 Hz.

TS 10 Cue Light Receiver

This ABS box has a large red LED indicating the

ATTN (Attention) signal, an acknowledge (ACKN)

button and a large green LED indicating the GO

signal. The TS 10 receiver is powered by the TS 120

Cue Light Master Station.

TS 99 Cue Light Preset Control

The TS 99 Preset Control is powered by the TS

120 via the interconnecting cable. It can hold a

maximum of 100 presets, stored in non volatile

memory. Each preset is a selection out of maxi-

mum 144 channels, obtained when twelve TS 120

master stations are linked (see above ‘Linking two

or more TS 120 Master Stations’). Each preset has

its page number, which is selected and displayed

in the LED screen by using the ‘up’ and ‘down’

push buttons.

The complete ASL Cue Light system consists of one or more TS 120 12-channel Master Stations, the

required number of TS 10 Cue Light Receivers, and the optional TS 99 Preset Control unit. Connections

between Master Stations and Receivers utilize standard microphone cables with XLR-3 connectors.

Two or more TS 120 Master Stations can be interlinked using the D9 connectors on the rear panel. Linking

two units, for example, creates a 24-channel cue light system. Up to twelve units may be linked in this

manner, for a maximum of 144 channels. Regardless of how many units are linked, only one TS 99 Preset

Controller is required.

TS 120 Cue Light Master Station

TS 99 Cue Light Preset Control TS 10 Cue Light Receiver

ASL provides a complete array of intercom accessories, allowing system designers to customize each

intercom conguration to match specic application requirements. All ASL accessories are designed to

exacting tolerances, and manufactured using high-grade components, in order to provide years of reli-

able service in either portable/touring or xed installation applications.

IS 141 Sound and Light CALL Beacon

The CALL light consists of red, dimmable

LEDs. The high volume buzzer can be ad-

justed or completely switched o.

IS BLINQ LED CALL Light

The XLR-3 connector is mountable to the

output of a Beltpack or to an XLR micro-

phone cable connected to an ASL Intercom

output.

IS 03 Intercom Handset

IS 02 Headset Extension Cable

The IS 02 is a 3 m Headset Extension Cable

tted with an XLR-4 connector.

IS 01 Extension Spiral Cable

The IS 01 Spiral Extension Cable is tted with

XLR-3 connectors and will extend up to 3.5 m.

IS Series Split Box

The IS 026 Intercom line Split Box features

two XLR-3 female into six XLR-3 male con-

nectors.

TR-2 Transformer

Transformers are sometimes the only way

to interconnect audio equipment safely

and properly. The TR-2 is tted with profes-

sional (broadcast) specication transfor-

mers and all the required connectors.

HS-1/D Headphones

HS-1/D is a lightweight, half open, single

mu headset with dynamic microphone,

cable and XLR-4 connector.

HS-2/D Headphones

HS-2/D is a lightweight, half open, double

mu headset with dynamic microphone,

cable and XLR-4 connector.

HR-2/E Headphones

HR-2/E is a double mu, closed headset

with noise canceling electret microphone

(left or right-side use), cable and XLR-4

connector.

IS Series Matrix Switches

The IS 640/12 and IS 640/18 Matrix Switches assign either 12 or 18 intercom lines to 6 intercom

channels (19”/1U). Units can easily be interconnected by a at cable allowing the user to extend

the number of intercom lines indenitely.

IS 011/IS011A/IS011B

Wall Boxes for intercom lines. Surface or

ush mounting.

16 17

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios

ASL INTERCOM BS 216 Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta ASL INTERCOM BS 216